American Welding Society - AWS
As a leader in welding education and technology development, AWS promotes best practices and works to advance the science and application of welding and allied processes such as joining, brazing, soldering, cutting, and thermal spray.
AWS A5.9/A5.9M:2012
Specification for Bare Stainless Steel Welding Electrodes and Rods .This specification prescribes the requirements for classification of solid and composite stainless steel electrodes (both as wire and strip) for gas metal arc welding, submerged arc welding, and other fusion welding processes. It also includes wire and rods for use in gas tungsten arc welding.
Classification is based on chemical composition of the filler metal. Additional requirements are included for manufacture, sizes, lengths, and packaging. A guide is appended to the specification as a source of information concerning the classification system employed and the intended use of the stainless steel filler metal.
This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other. A5.8M/A5.8 Specification for Filler Metals for Brazing and
Braze Welding .AWS A5.22/A5.22M:2012
Specification for Stainless Steel Flux Cored
and Metal Cored Welding Electrodes and RodsAWS A5.23/A5.23M:2011
Specification for Low-Alloy Steel Electrodes and
Fluxes for Submerged Arc Welding
AWS A5.36/A5.36M:2012
Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes for Gas Metal Arc WeldingThis specification combines the two specifications previously issued by the American Welding Society for the classification of carbon and low-alloy steel flux cored electrodes (AWS A5.20/A5.20M, Specification for Carbon Steel Electrodes for Flux Cored Arc Welding, and AWS A5.29/A5.29M, Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding).
In addition, this specification includes provisions for the classification of carbon and low-alloy steel metal cored electrodes. Heretofore, carbon steel metal cored electrodes were classified underAWS A2.4:2012
STANDARD SYMBOLS FOR WELDING, BRAZING, AND NONDESTRUCTIVE EXAMINATIONEstablishes a method of specifying certain welding, brazing, and nondestructive examination information by means of symbols.
Contains detailed information and examples for the construction and interpretation of these symbols. This system provides a means of specifying welding or brazing operations and nondestructive examination, as well as the examination method, frequency, and extent.
150 pages, 6 Tables, 56 Figures.
AWS B5.5
Specification for the Qualification of Welding EducatorsBUNDLE B :2012
Save a bundle when you buy an AWS structural bundle. Get 15% OFF the individual standards- purchase prices.
Contains:
AWS D1.1/D1.1M:2010, and the most recent editions of:
D1.2/D1.2M
D1.3/D1.3M
D1.6/D1.6M
D1.4/D1.4M
AASHTO/AWS D1.5M/D1.5AWS C3.7M/C3.7
Specification for Aluminum Brazing
AWS C3.8M/C3.8
Specification for the Pulse-Echo Ultrasonic Examination of Brazed Joints .AWS C3.11M/C3.11
Specification for Torch SolderingAWS A5.14/A5.14M:2011
Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods .
AWS A5.21/A5.21M:2011
Specification for Bare Electrodes and Rods for Surfacing (40 pages)
Resistance Welding Pocket Handbook Portable basic information and do’s and don’ts. Common defects and their causes. Sample weld schedules. 33/4" by 6, spiral- bound, 48 pages, 12 tables, 16 figures (2011).
ANSI/AWS A5.32M/A5.32:2011
Welding Consumables - Gases and Gas Mixtures for Fusion Welding and Allied ProcessesANSI/AWS RWPH:2011
Resistance Welding Pocket HandbookANSI/AWS D1.4/D1.4M:2011
Structural Welding Code - Reinforced SteelANSI/AWS A5.21/A5.21M:2011
Specification for Bare Electrodes and Rods for SurfacingANSI/AWS D3.6M:2010
Underwater Welding CodeANSI/AWS D10.14M/D10.14:2010
Guide for Multipass Orbital Machine Pipe Groove Welding Revised
ANSI/AWS D1.5M/D1.5:2010
Bridge Welding Code (Joint Publication with AASHTO)ANSI/AWS F2.3M:2011
Specification for Use and Performance of Transparent Welding Curtains and Screens
ANSI/AWS B2.1-22-015:2011
Standard Welding Procedure Specification (Swps) for Gas Tungsten Arc Welding of Aluminum (M/P/S-22 to M/P/S-22), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing
ANSI/AWS C7.2M:2010
Recommended Practices for Laser Beam Welding, Cutting, and Allied ProcessesANSI/AWS D14.3/D14.3M:2010
Specification for Welding Earthmoving, Construction and Agricultural EquipmentANSI/AWS A5.13:2010
Specification for Surfacing Electrodes for Shielded Metal Arc WeldingANSI/AWS D3.9:2010
Specification for Classification of Weld-Through Paint Primers